WATERPROOF FEATURE OF THE COMPONENT
We measure a fabric's resistance to water pressure, expressed in terms of the height of a water column in mm (based on the ISO 811 standard). The higher the water pressure, the more waterproof the fabric. A component with a 10,000 mm rating can withstand the pressure of a 10,000 mm column of water (which is equivalent to a 3-hour rain shower). Waterproof rating is expressed in Schmerbers (for example: 10,000 Schmerbers).
COMPONENT BREATHABILITY
Component breathability is measured by its thermal evaporative resistance (RET).
This is its capacity to let water vapour generated by the body during physical activity escape and therefore avoid water accumulating on the skin.
The lower the RET, the more breathable the fabric.
RET ≤ 6: very breathable fabric
RET ≤ 12: breathable fabric
RET ≤ 20: little breathability
Our product has a 12 RET rating
COMPONENT RESISTANCE
Resistance to wear and abrasion test: for example, we check that our fleeces do not pill using tests conducted in laboratories. Colour retention test: the colour fastness is verified to ensure that the colours do not bleed when coming into contact with saliva. Ageing test: repeated washing should not affect the fabric's properties, behaviour, thickness or appearance.
Windproof effect
Coating applied to the fabric makes it waterproof and windproof. Waterproof fabric has the necessary technical characteristics to be considered windproof. Protection from the wind is critical, as whether playing sports or at rest, wind can chill the body significantly.
TECHNICAL DETAILS
Cuff adjustment with rip-tab straps. Extra length at back to protect rear when sitting down. 2 ventilation zips at front. Media pocket with headphone feed.
Care
1/ Machine wash (30°C): fasten rip-tabs and use mild detergent. Wash jackets and trousers inside out. Loosen straps and elastics. 2/ Avoid folding the garment too much in the washing machine: this can damage it. 3/ Do not mix clothing styles and colours. 4/ Don't use bleach. 5/ Choose a full rinse and gentle spin cycle. 6/ Drying option: Either line or tumble dry (low temperature, short cycle).
WHERE DO OUR JACKETS COME FROM?
Created in our international design centre at the foot of the Mont Blanc in France, this fleece is then manufactured and assembled by our suppliers in China and Vietnam.
These are partners that have genuine expertise in making our tents and with whom we are in close collaboration.
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.